产品概况 - 三脚架

Price margin
最高高度
载重

三脚架 Report 833

278,00

The tripod Report 833 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level.
This enables a quick and precise adjustment of the tripod.
The pivoting range is 30° in all directions.
The fastening screw is spring-loaded. Pla [...]

More details

独脚架 型号112

94,00

这款独脚架可以在任何地方使用,特别适用于在无法使用三脚架的地方和必须在瞬间拍摄的时候,如运动场景拍摄。它有两款不同大小的式样。安装的云台连接座是可以垂直倾斜的。脚架可以灵活张开。可以通过替换脚尖,钢钉或橡胶垫增加独脚架的直立稳定性。

More details

EMV-三脚架Report 2022HL

211,00

- Mounting head made of wood
- Minimum of metal components
- Centre column eligible (wood or synthetic material), standard length 50 cm
- Leg spread at an angle of about 27°
- Feet made of synthetic material cap

More details

三脚架 Report 943

367,00

The tripod Report 943 is equipped with the module insert 4, i.e. with a centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing, and a levelling ball. The centre column is additionally equipped with a rotating panorama plate. By means of the cent [...]

More details

车窗支架 (大)

68,00

大型的汽车窗三脚架具有面积大的承托板,用户在使用它的时候会很舒适,而且可以直接在上面放置带大镜头的相机。当然也可以安装云台连接座使用。
。 承托板 150x280毫米,可倾斜度 负 10度到 正90度
。 固定螺丝规格为1/4",也可提供3/8"
。 承重可达10公斤
。 重量 920克
颜色:自然色

More details

三脚架 Report 402

269,00

The tripod Report 402 is equipped with the module insert 0 and is thus the simplest and cheapest tripod version.
The support area has a diameter of 60 mm and is equipped with a fixed fastening screw (size to be selected).
In combination with our tripod heads, it can be used for various applicatio [...]

More details

三脚架 UNI 12 (平衡底座直径100mm)

310,00

这一系列的三脚架是摄像的理想选择。 所有专业摄像机都可以直接安装在直径为75毫米和100毫米的云台底座盘上。
另外我们配有直径为75毫米和100毫米的云台底座盘,可以与任意的斜度调节装置搭配使用。

不带开脚度调节装置
最高高度是在腿管开脚度20度时的高度。

More details

三脚架 Report 432

327,00

The tripod Report 432 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level.
This enables a quick and precise adjustment of the tripod.
The pivoting range is 30° in all directions.
The fastening screw is spring-loaded. Pla [...]

More details

三脚架 UNI 87C (最大高度 188 cm)

778,00

These innovative products offer an impressive combination of small packaged size, high load capacity and extremely good damping. 3-point clamping with the new clamps provides even greater rigidity and security. This means the tripod can take heavy loads despite the reduced diameter of the individual [...]

More details

独脚架 型号 113

108,00

这款独脚架可以在任何地方使用,特别适用于在无法使用三脚架的地方和必须在瞬间拍摄的时候,如运动场景拍摄。它有两款不同大小的式样。安装的云台连接座是可以垂直倾斜的。脚架可以灵活张开。可以通过替换脚尖,钢钉或橡胶垫增加独脚架的直立稳定性。

More details

三脚架 Report 112

199,00

The tripod Report 112 is equipped with the module insert 1.
This has a spring supported fastening screw 1/4", 3/8" or 5/8". It is suitable for the simple mounting of heavy heads or devices. the head is put on and is connected to the tripod by turning the screw.
Single tripod leg extension.

The [...]

More details

三脚架 UNI 17

573,00

超轻合金云台连接座带有可倾斜到30度的球形云台,气泡水平仪以及手摇柄控制的中轴。
UNI 17和27中轴长度为50厘米(可调区域39厘米)
中轴上的斜齿自动作为中轴的制动器
中轴顶面的直径为89毫米
螺丝标准规格为3/8”, 也可以根据客户需要提供其它规格的螺丝

不带开脚度调节装置
最高高度是在腿管开脚度20度时的高度

More details

三脚架 Report 202

189,00

The tripod Report 202 is equipped with the module insert 0 and is thus the simplest and cheapest tripod version.
The support area has a diameter of 60 mm and is equipped with a fixed fastening screw (size to be selected).
In combination with our tripod heads, it can be used for various applicatio [...]

More details

用于天文设备的三脚架 REPORT 312

315,00

360度轻合属云台连接座,带有用1/4”或3/8”规格的弹簧式紧固螺丝。开脚度大概有20度和45度两档,其余角度可以随意调节,最大可到90度。随包装附送的置物板不仅能放置物品,也能提高脚架的稳定性。另外我们为附送的连接片推荐使用Meade生产的ETX-天文望远镜。

More details