产品概况 - 摄影三脚架

Price margin
最高高度
载重

三脚架 UNI 12 (平衡底座直径100mm)

325,00

这一系列的三脚架是摄像的理想选择。 所有专业摄像机都可以直接安装在直径为75毫米和100毫米的云台底座盘上。
另外我们配有直径为75毫米和100毫米的云台底座盘,可以与任意的斜度调节装置搭配使用。

不带开脚度调节装置
最高高度是在腿管开脚度20度时的高度。

More details

三脚架 Report 402

269,00

The tripod Report 402 is equipped with the module insert 0 and is thus the simplest and cheapest tripod version.
The support area has a diameter of 60 mm and is equipped with a fixed fastening screw (size to be selected).
In combination with our tripod heads, it can be used for various applicatio [...]

More details

三脚架 Report 202

189,00

The tripod Report 202 is equipped with the module insert 0 and is thus the simplest and cheapest tripod version.
The support area has a diameter of 60 mm and is equipped with a fixed fastening screw (size to be selected).
In combination with our tripod heads, it can be used for various applicatio [...]

More details

三脚架 Report 112

199,00

The tripod Report 112 is equipped with the module insert 1.
This has a spring supported fastening screw 1/4", 3/8" or 5/8". It is suitable for the simple mounting of heavy heads or devices. the head is put on and is connected to the tripod by turning the screw.
Single tripod leg extension.

The [...]

More details

三脚架 UNI 87C (最大高度 188 cm)

778,00

These innovative products offer an impressive combination of small packaged size, high load capacity and extremely good damping. 3-point clamping with the new clamps provides even greater rigidity and security. This means the tripod can take heavy loads despite the reduced diameter of the individual [...]

More details

三脚架 UNI 16C

550,00

超轻合金云台连接座带有可倾斜到30度的球形云台和气泡水平仪
球型云台带有摩擦装置,云台承托面直径100毫米
弹簧式外露轴心使用标准固定螺丝3/8”,也可以根据需要提供其它规格的螺丝

带有开脚度调节装置, 分为20度,35度,55度,80度档

More details

迷彩三脚架Franz Bagyi适用于直径75 mm的平衡底座

434,00

迷彩三脚架
Franz Bagyi 款
此款三脚架是为所有的相机特别是带较重的长焦镜头量身定制的。三脚架的高度也非常适合摄影师坐着时的高度。特别牢固耐用的它适合于条件恶劣的户外作业,而浑身喷漆成的迷彩装是此款的另一亮点。
冠名本三角架的著名户外摄影师,伪装专家Franz Bagyi 参与了设计制造过程,并起到了关键性作用。

此款三脚架有4个角度调节档,通过一个小扳扣可以进行调节。这样可以让三角架降低至贴近地面。史无前例的优质制作工艺给三脚架的超长使用寿命提供了保障,也使其能经受住巨大的负荷并有效预防整体倾倒。

More details

三脚架 Report 232

246,00

The tripod Report 232 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level.
This enables a quick and precise adjustment of the tripod.
The pivoting range is 30° in all directions.
The fastening screw is spring-loaded. Pla [...]

More details

三脚架 Report 753/520

289,00

云台连接座带有固定而适用的2D-倾斜装。
定位固定螺丝的基本标准规格为1/4",也可根据需要提供3/8"的规格
通过被固定的倾斜装置和三脚架组合在一起可以为用户提供超强的稳定性。用户可以自己选择使用型号为520并带有长而可移动的相机固定螺丝的相机连接座, 或者选择使用型号为520带弹簧式的固定摄像机钉的摄象机连接座。
这款三脚架有7种不同大小的式样,可以满足用户最理想的选择。

三节式三脚架

More details

三脚架 Report 122

218,00

The light magnesium mounting head serves as module basis for 10 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. [...]

More details

三脚架 Report 733

258,00

The tripod Report 733 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level.
This enables a quick and precise adjustment of the tripod.
The pivoting range is 30° in all directions.
The fastening screw is spring-loaded. Pla [...]

More details

三脚架 Report 813

249,00

The tripod Report 813 is equipped with the module insert 1.
The support area has a diameter of 60 mm and is equipped with a spring-loaded fastening screw (size to be selected).
This module insert is designed for the assembly of heavy tripod heads and devices. They are placed down and securely fi [...]

More details

三脚架 Report 212

216,00

The tripod Report 212 is equipped with the module insert 1.
This has a spring supported fastening screw 1/4", 3/8" or 5/8". It is suitable for the simple mounting of heavy heads or devices. the head is put on and is connected to the tripod by turning the screw.
Single tripod leg extension.

The [...]

More details

三脚架 UNI 19C

623,00

超轻合金云台连接座带有气泡水平仪以及手摇柄控制的中轴。
UNI 19和29中轴长度为50厘米(可调区域39厘米)
中轴上的斜齿自动作为中轴的制动器
中轴顶面的直径为89毫米
螺丝标准规格为3/8”, 也可以根据需要提供其它规格的螺丝

带有开脚度调节装置, 分为20度,35度,55度,80度档

More details

侧杆

58,00

。 像云台连接座一样在三脚架上安装
。 可以水平移动照相机
。 可以在横把手的中部或者横把手一端安装照相机
。 在需要的情况下,可以在锁定螺丝除替换成附加的照相机托盘,那样它就有3个照相机固定处
。 长度:500毫米
。重量:520克

More details