Products Listing REPORT System from Berlebach ® Tripods

Products Listing - REPORT System

Binoculars Support

42,00 €

- Size: ca. 162 x 102 mm
- last hole in the strap on 290 mm
- base thread 1/4" and 3/8"

MonkeyGrip 2 for REPORT

159,00 €

Clamp Element for attachment to the tripod legs of the system REPORT and Mini-Tripods.
Easy and quick installation with just one clamping lever (no screwing required).
You are able to screw directly a compact camera, ball- head or the plate # 320517.
The angle for levelling is 35°.
Diameter of [...]

SPEEDY - The carrying coupling

129,00 €

There are many camera safety belt systems on the market, but with Berlbebach’s SPEEDY, handling the camera becomes even faster and less complicated. By contrast to other designs, the system cannot be detached by itself. This is realised with the help of a patented spring clip system, which only rele [...]

Folding Tripod Dolly from Ash wood

212,00 €

Folding Tripod Dolly from Ash wood
- Ø wheel 70 mm/ 2,8"
- brake for every wheel
- simple to fix the tripod with round cord
- carriagesize 16 x 58 x 12 cm / 6x22x4.7"
- no telescopic
- max. load 50 kg

holder 75 cm bicycle

92,00 €

holder 75 cm for bicycle
for tripods Report
diameter 14 cm

Beamer and Projector Tray

65,00 €

- Size 36 x 31 cm
- Takes loads of up to 18 kg
- Can be mounted on any Report Berlebach tripod with metal centre column
- in order to fit the plate is the centre column to turn
- Suitable for projector, monitor, laptop computer, etc.

holder 50 cm langfor bicycle

70,00 €

holder 50 cm long for bicycle
for tripods Report
Diameter 14 cm

Tray Bag

36,00 €

The storage bag made of high-quality and extremely durable Cordura is primarily used for storing camera and accessory parts, but can also be used for loading (max. 5 kg).
The bag has an edge length of 33 cm.
To mount the hooks are mounted in the eyelets of built-in clamps on the tripod.

Levelling Unit With Lock Screw (Diameter 75 mm)

86,00 €

Levelling Unit With Lock Screw (Diameter 75 mm)

Deposit Tray Size 37 x 37 x 37 cm

54,00 €

- Practical tray for small items, fits between the tripod legs to provide extra stability
- A set of tripod leg brackets is also required for tray attachement purposes
Material birch plywood, due to the nature of the material, color deviations may occur especially with color-stained plates.

MonkeyGrip 1 for REPORT

149,00 €

Clamp Element for attachment to the tripod legs of the system REPORT and Mini-Tripods.
Easy and quick installation with just one clamping lever (no screwing required).
You are able to screw directly a compact camera or umbrella.
The angle for levelling is 35°.
Diameter of the plate: 30 mm
Load [...]

Tripod Case 110 cm, diameter 14 cm for Report

60,00 €

Berlebach® tripod cases give your tripod optimum protection and, at the same time, provide superb carrying convenience du to all-round carrying grips and an extra shoulder strap. Breathable cotton fabric guarantees temperature and moisture balance.

Lateral Arm

68,00 €

- Is attached to the tripod like a tripod head
- Allows the camera to be positioned above or below the tripod apex
- Camera can be mounted at the centre or end of the arm
- Locking screw can be replaced by an additional camera plate as required to enable 3 connections for cameras
- Length: 500 m [...]

Tripod leg brackets Report

25,50 €

Is required to connecting the deposit tray or spreader.

Spread Stopper 27 for Tripods UNI 4/6/7/8/9 and Report series 1 and 2

68,00 €

The following is achieved by using the safety catch ...
- rapid, even leg spread
- always 100% safe setup, as the legs can never slip away.
- no chain required
- quick placement of the triangular base
- Attention, legs can then only be fixed at an angle of approx. 23°.
For all UNI tripods 4, 6 [...]

Threaded Socket C

3,00 €

- Extra long (8.5 mm) for reducing the inside thread from 3/8" to 1/4"